Installation Guide

Install u-mounts (J) to post with 1” screws
(A). The height and width of this panel can
be customized. Then install assembled panel
in the u-mounts. Attach the rails to the
u-mounts on each side using a 1” screw and
screw cap(D).
8
32.5
”
32.5”
4”
Place your post skirt (I) over your vinyl
post (P). Place the post over the wood
post or concrete mount.
6
Assemble the panels using 2 top/bottom
rails (O), 1 mid-rail (N), and 7 pickets (M).
7
Line up the wood post with the concrete post
mount and pre-drill the holes of the
concrete mount into the wood with a 3/16”
bit. Install the #14 x 2” (T) screws into the
pre-drilled holes.Wood cannot be higher
than 82”.
Optional Concrete Mount Step
5