Installation Guide

We’re happy to help. Call 1-888-743-3673.

1. Measurethedistancebetweenposts.

2. Subtract½”fromthetotallengthofthedistancetoallowforthebrackets.

3. Iftherailsneedtobecut,subtractanequalamountfromeachendoftherail.Thiswillkeepthe

picketscenteredinthepanel.

4. Measureandmarkboththetopandbottomrails,assuringthatthecutisnotinthemiddleofapicket

mountandthatthepicketmountslineupbeforecuttingtherail.

5. Cuttherailswithane-toothmitersaworaportablebandsaw.

6. Oncetherailsarecut,insertthepicketsontothebottomrailusingtheinstalledpicketmounts,then

snapthetoprailintothepickets,completingthepanel.

7. Oncethepanelisassembled,installthefootblockmountinthecenterofthebottomrailusingthe

1”self-tappingscrew.

8. Determinethedistancebetweenthedeckorpatioandthebottomrailbasedonlocalbuildingcodes

(generally2”),thencarefullycutafootblockpiecetomatchthedistance(apre-cut2”pieceis

included,aswellasalongerpieceforcustominstallations).

9. Pushthefootblockontothepicketmountonthebottomrail.

Section 2: Assembling the Panel With the Foot Block

Aluminum Railing Assembly