Installation Guide

We’re happy to help. Call 1-888-743-3673.

1. CordlessDrill/ImpactDriver

2. 13/64”DrillBit

3. #3PhillipsScrewdriverBit

4. SpeedSquare

5. 2’Level

6. TapeMeasure

7. Mitersaworportablebandsaw

8. RubberMallet

9. Postlevel(optional)

1. Layoutandmarkwherethepostswillbeinstalledonthedecksurface.Assurethatthe5”x5”base

plateisatleast2”fromtheedgeofthedecktoallowforthe2-piecetrim.

Ifinstallingonadeck(wood,composite),assurethatthepostswillattachtothesubstructureofthe

deckorpatio.Thedeckingmayneedtobereinforcedwithsupportlumber(backerboardsuchas

a2”x10”or2”x12”treatedlumbercuttofittightlybetweenthejoistsandinstalledflatunderthe

decking).Useappropriatestructural weatherprooffasteners(notincluded)foryourapplication.

Ifinstallingonconcrete,usetheappropriatestructural weatherproofconcreteanchorsforyourapplication.

4. Usetheincludedshimsandaleveltoplumbandsquarethepost.

5. Securethepoststothedeckandslideontheincluded2-piecepostskirt.

Tools

Section 1: Installing the Posts

Aluminum Railing Assembly