Instructions / Assembly

SCOTTSDALE 7' X 8'
Apply a small amount of adhesive to backside of U-Channels (against post) to hold in place if needed .
Use a small teardrop of glue in the inside corners of cap.
3.4" approx. 2"
1.75 x 3.5 x 95.75 3.5"
13.25"*
1.5 x 5.5 x 95.75
INTERLOCKING T&G PICKETS
U-Channels
56.75"
1.5 x 5.5 x 95.75
*
Actual measurements may vary
*
Panel should be installed 2" off ground
Updated 01/31/2011
PWPR-SQLAT-7X8UG
96" *
84.5"
1
Qty
Item
Dimension
1
Top Rail
5.5"
5.5"
1
1
Bottom Rail
1-1/2" x 5-1/2 " x 95-3/4"*
Aluminum
1-1/4" x 1-3/4" x 95-3/4"*
1-3/4" x 3-1/2" x 95-3/4"*
1
1-1/2" x 5-1/2" x 8' Rail
U Channels
1-1/8" x 1-1/4" x 56-3/4"*
18
Spindles
1-1/4" x 1-1/4" x 16-3/4"*
2
End Spindles
1-1/4" x 1-1/4" x 16-3/4"*
2
Pickets
7/8" x 1-1/2 " x 89-1/2"*
Mid Rail
1-1/2" x 5-1/2" x 95-3/4"*
15
T&G Pickets
7/8" x 6" x 60-1/4"*
2
1-1/4" x 1-1/4" x 192"
1-1/4" x 1-1/4" x 192"
Material List
1-1/4" x 1-3/4" x 8"*
61" U Channel
7/8" x 6" x 64" T&G
7/8" x 1-1/2 " x 16'
WRHS USE ONLY
1-3/4" x 3-1/2" x 8' Rail
1-1/2" x 5-1/2" x 8' Rail
Aluminum
U-Channels