Manualshelf

Installation Guide

ManualsBrandsWeatherables ManualsOtherTacoma 6 ft. x 8 ft. Tan Vinyl Privacy Fence Panel
12345
Solid Privacy Closed Spindle Top
1
Follow instructions for digging holes and
layout.
2
Install 1 post (post A) with concrete around
the post – level and plumb.
3
Have another post (post B) sitting in the
adjacent hole.
4 Install the bottom and mid-rail in post A.
5
Slide the T&G pickets between the bottom
and mid-rail (don't forget the U-channel on
first and last pickets).
6
Install the bottom rail in post B.
7 Install the top rail in post A.
8
Put the pickets in the holes between the top
rail and the mid-rail.
9
Install the top rail and mid-rail in post B.
10
Put concrete around post B and level and
plumb.
11
Repeat down the fence line.
Solid Privacy with Mid Rail – All heights
1 Follow instructions for digging holes and layout.
2 Install 1 post (post A) with concrete around the post – level and plumb.
3 Have another post (post B) sitting in the adjacent hole.
4 Install the bottom and mid-rail in post A.
5 Slide the T&G pickets between the bottom and mid-rail (don't forget the U-channel on first and last pickets).
6
Install the bottom rail in post B.
7 Install the top rail in post A.
8 Slide the T&G pickets between the mid-rail and the top-rail (don't forget the U-channel on first and last pickets).
9
Install the mid-rail and the top-rail into post B.
11
Put concrete around post B and level and plumb.
12
Repeat down the fence line.
Semi - Privacy and Pool styles that have a middle rail (5' or taller).
1 Follow instructions for digging holes and layout located on page one.
2 Install 1 post (post A) with concrete around the post. Level and plumb.
3 Have another post (post B) sitting in the adjacent hole.
4
5 Insert the bottom and mid-rails in post B.
6
Insert the top rail into post A with the opposite end (at post B) upward towards the sky at an angle.
7 Slowly insert the pickets one at a time as you lower the rail into place.
8 As you near the last few pickets it will be necessary to pull post B outward to insert the top rail.
9
Put concrete around post B and level (horizontal) and plumb (vertical).
10
Repeat the above method down the fence line.