Instructions / Assembly

Bradford 7x8
Note: If re-ordering additional product, please compare your existing specs with our current specs for any changes or updates.
Apply a small amount of adhesive to backside of U-Channels (against post) to hold in place if needed .
Use a small teardrop of glue in the inside corners of cap.
3.645" 2"
1.75 x 3.5 x 95.75 3.5"
9"
1.5 x 5.5 x 95.75
INTERLOCKING T&G PICKETS
61"
1.5 x 5.5 x 95.75
*
Actual measurements may vary
*
Panel should be installed 2" off ground
U
p
d
a
t
e
d
11/10/2014
1
Material List
96" *
5.5"
84.5"
5.5"
Qty Item Dimension WRHS USE ONLY
1 Top Rail 1-3/4"x 3-1/2" x 95-3/4"* 1-3/4" X 3-1/2" X 8' Rail
1 Mid Rail 1-1/2"x 5-1/2" x 95-3/4"* 1-1/2" x 5-1/2" X 8' Rail
1 Bottom Rail 1-1/2"x 5-1/2" x 95-3/4"* 1-1/2" x 5-1/2" X 8' Rail
1 Aluminum 1-1/4"x 1-3/4"x 95-3/4"* 1-1/4" x 1-3/4" x 8'
2 U Channels 1-1/8"x 1-1/4" x 61"* 61" U Channel
PWPR-CTRND-7X8
17 Spindles .75" Round Black Spindle .75" Round Black Spindle
15 Pickets 7/8 x 6 x 64-1/4* 7/8" X 6" X 64" T&G
U-Channels
Aluminum