Installation Guide

We’re happy to help. Call 1-855-224-9761.
2
1. The bracket kits include two different
size screws. The 1-1/2” screws are used
to install the mounting bracket to the
post. The 1” screws are used to attach
the rail to the mounting bracket.
2. If you are using an optional post mount,
use the 1” screws that come with the
post mounting hardware to install the
mounting brackets.
3. While marking the angle on the bottom
rail, ensure the pickets are equally
spaced from each post.
4. A non-ferrous metal blade can be used
to cut the vinyl and aluminum at the
same time. Cut slowly and use all safety
precautions.
5. Before installing the rails, ensure the
aluminum is seated into the vinyl
rail properly. The large opening of
the H-channel should be towards the
pickets.
6. If the posts are plumb, the angle should
be the same for both rails. Always
double check before cutting the rails.
Installation Tips:
Picket
Aluminum
H-Channel
Top Rail
Classic Stair Railing Installation Guide