Installation Guide
Table Of Contents
- Please note:
- Tools:
- • Hacksaw or metal cutting saw
- • Drill
- • Drill bits 5/32”
- • Screwdriver
- • Measuring tape
- • Level
- Straight Railing Installation
- Step 1: Measure & Locate All Posts
- Step 2: Install bottom rail, bottom brackets and foot block(s).
- 1. Locate and install the foot block(s).
- 2. Cut bottom rail to fit between posts if necessary.
- 4. Insert the bottom rail into bottom bracket at both ends, then position the bottom rail between posts, secure the brackets on the post with 2 #10-1" screws.
- Note：
- The space between the bottom rail to the ground is 2.75", use a 2.75" high piece of wood as a temporary support.
- Pre-drill holes on the post to install the bracket.
- When cutting the bottom rail, subtract 5/16” from each mark and cut from both ends for even picket spacing.
- Note: The brackets should be spaced 29 1/4” apart for 36” tall railing and 35 1/4” apart for 42” tall railing.
- IMPORTANT: Do not snap in the last 4 spacers before installing the last 4 pickets.
- Insert last 4 pickets as group and adjust the picket distance, THEN snap in the spacers.
Arlington Aluminum Railing Installation Guide
We’re happy to help. Call 1-855-224-9761.
1
THE BEST CHOICE FOR STRONG & DURABLE RAILING SYSTEMS
Our exclusive manufacturing process ensures our aluminum railing will provide
superior strength plus it is virtually maintenance free. This guide will help make your
installation easy. For questions, please call 1-855-224-9761 and welcome to
Weatherables
®
.
Please note:
It is the responsibility of the installer to conform to local building codes and safety
requirements. It is also the installer’s responsibility to obtain all necessary building
permits. The purchaser and installer should review the intended use of the products
with a licensed professional engineer to determine code compliance. Weatherables
®
or
its distributors shall not be held liable for improper or unsafe installations.
These instructions are guidelines and do not cover every installation scenario. Review
all instructions before starting railing installation. The installer may need to modify the
exact installation method to meet unique site requirements.
Tools:
•
Hacksaw or metal cutting saw
•
Drill
•
Drill bits 5/32”
•
Screwdriver
•
Measuring tape
•
Level