Instruction manual

10
Operations
Using the AC Out Power (200W Maximum Output)
a. Plug an AC appliance into one of the two AC outlets.
b. Press the AC Power switch to turn the AC power on, the AC Power Indicator will
illuminate when the AC power is on.
c. Use the appliance freely, and remember to recharge the unit afterwards.
This unit has built-in protection against output overload in the AC sockets. If you
connect an appliance that draws more than 200W, or one which draws excessive
surge power, the power to the AC outlet automatically shuts off. To resume AC
outlet use, switch off the AC power switch ,and then switch back on.
Setting the Clock & Alarms
a. Press and hold the CLK ADJ button until the clock hour blinks
b. Press Tune +/- to change the clock hour
c. Press the CLK ADJ button
d. Press Tune +/- to change the clock minute
e. Press the CLK ADJ button again to set the ALM 1
f. Press Tune +/- to change the ALM 1 hour
g. Press the CLK ADJ button
h. Press Tune +/- to change the ALM 1 minute
i. Press the CLK ADJ button again to set the ALM 2
j. Press Tune +/- to change the ALM 2 hour
k. Press the CLK ADJ button
l. Press Tune +/- to change the ALM 2 minute
m. Press the CLK ADJ button
See the Run Times Chart on page 7 for length of use times.