Product Manual
©2015 KNAACK LLC
2
TOOLS REQUIRED
PARTS LIST
(4) 5/16-18
Blind Fastener
(1)
Installation Tool
(4) 5/16-18 x 1"
Hex Head Bolt
(4) 5/16-18 x 1-1/4"
Hex Head Bolt
(1) 5/16-18 x 2-1/4"
Black Oxide Bolt
(4)
Plastic Retaining Washer
(14) 5/16"
Flat Washer
(4)
Fender Washer
(12) 5/16-18
Nylon Lock Nut
(1) 3/4"
Round Cap Plug
(8) 5/16"
Lock Washer (4) “J” Bolt (2) Leg
(2) Mounting Pads
(20" and/or 27" and/or 45")
ALUMINUM BED UPFIT KIT - 32-0243
• Tape
• Open or Box End Wrench - (2) 1/2”, 9/16”
• Electric Drill
• Bits: 3/8", 1/2"
• Carpenters Square
• Pencil/Marker
• Measuring Tape/Ruler
• Utility Knife/Scissors
(4)
Vinyl Tape
(1)
Zinc Rich Primer
(8) 1/2" x 1"
Plastic Washer
(4) 11/32" x 7/8"
Plastic Washer
(8) 5/16" x 3/4"
Plastic Washer
BLIND FASTENER INSTALLATION
Place a drop of oil on black oxide bolt for lubrication before assembling.
Place the Blind Fastener in the hole and use 1/2" or 7/16" wrench to
tighten black oxide bolt until fastener is fully seated (it will start out hard
and get easier as fastener “bulbs” out).
Make sure the Blind Fastener and Installation Tool do not turn during
installation.
Black Oxide Bolt
Flat Washer
9/16" Wrench
Installation Tool
Blind Fastener
ALUMINUM TRUCK BED INSTALLATION
Coat drilled holes with Zinc Rich Primer. Insert Blind Fastener through one
1/2" x 1" plastic washer. Insert Blind Fastener into drilled hole. Place
second 1/2" x 1" plastic washer through the bottom of the Blind Fastener.
Continue following installation instructions above to install Blind Fasteners.