Installation Instructions

www.naxa.com Page 7
Using USB Mode
When the speaker is in USB or Card mode:
Start, pause, or resume audio
playback
Press the Power button
Skip to the previous track Press –
Skip to the next track Press +
Decrease the volume level Hold –
Increase the volume level Hold +
Switch between USB, Card, BT, Aux In,
and FM modes
Press the Power button
Using AUX Mode
Connect devices without Bluetooth
®
by using the AUX
connection. The included 3.5mm AUX cable is required
to make this connection.
1. Turn the speaker on.
2. Insert one end of the included auxiliary cable into the
auxiliary-input port.
The speaker can play MP3 files from USB flash drives.
To do so, follow these steps:
1. Turn the speaker on.
3. Insert the USB flash drive containing your desired
audio files into the USB port on the speaker.
4. The speaker will automatically begin playing songs
from the inserted USB flash drive.
Using Card Mode
The speaker can play MP3 files from memory cards.
To do so, follow these steps:
1. Turn the speaker on.
3. Insert the memory c ard containing your desired
audio files into the memory card slot on the speaker.
4. The speaker will automatically begin playing songs
from the inserted memory card.
2. Press the Power button to enter USB mode.
2. Press the Power button to enter memory card mode.