Product Card

6. “-” is the intensity decrease button and Voice O key. For each
short-press, the voice prompts corresponding levels such as “level 14”,
“level 13” ......to increase one level. The intensity includes 15 levels
(15, 14, 13...... 0). Press “-” when the intensity reaches 1 and the voice
prompts: “min.”. Then press “-” again and the voice still prompts “min.”
with unchanged intensity. A long-press “-” turn on voice function.
Press “-” for two seconds to turn o the voice, and voice prompt
“mute mode” is given.
7. “ ” is the heating adjusting button. Press once to start heating and
the voice prompts: “Low-level hot compress”. The electrode is heated
while its temperature is kept at 38±2°C; Press twice, the medium level
is activated, when the voice prompt "Medium heat" is given while the
electrode temperature is kept at 40±2°C; Press three times, the high
level is activated, when the voice prompt "high level hot compress" is
given, while the electrode is kept at 42±2°C; Press again to turn o the
heating, and the voice prompt: “Stop heating”.
8. When the product is properly worn and used, the main machine is in
power-on state; when both heating and massage is not in service, the
product will automatically be turned o in about 120s, while the voice
prompt "Bye" is given; Once the product is not properly worn, it will get
automatically turned o in about 120s, while the voice prompt "Bye"
is given.
9. Where the battery is too low, the main machine is powered o
automatically while the voice prompt "Bye" is given.
● It is recommended to use the APP for control, There are more massage
modes to select and download, The operating mode of the APP is as follows:
Make sure that the Bluetooth of the mobile phone is turned on, turn on the
massager device, and click "Add Device" on the "Device" page of the APP.
Scan the QR code of the APP on the right.
Enter the email number, and get the email
verification code to complete registration.
Search for "SKG" in the mobile application
market to download and install the software.
Enter the email number, and get the email
verification code to complete registration.
Registration and login.
Add device.