Product Card
1. When the device has a low battery, the power key indicator lamp turns
yellow from blue, accompanied by a voice prompt: “low battery”.
At this time, you may charge the device by connecting the USB cable to
an adapter that meets the standards of household appliances
(output range:5V 1-2A) or to a computer USB port. While charging,
the yellow lamp flashes; when the massager is fully charged, the blue
lampis always on. It takes around 4 hours for the device to be fully
charged, after which, the device can be used for 3-4 hours.
2. Before use, first wet the skin of the cervical spine with a wet towel,
and then wear the product on the neck, so that the electrode is attached
the skin of the cervical spine. Then, adjust the position of the product,
turn on the device and adjust the appropriate massage intensity and mode.
3. Press and hold “ ” for two seconds to power on the device (with voice
prompt: Hi, SKG. ).
4. Enter “smart mode” with default level 0. When the device is on, each
time you press the “ “you switch one mode in cycle among four modes
(the voice prompts “Smart mode”, “Relax mode”, “Active mode”,
“Physical therapy mode” when the mode is switched). Every time when you
switch the mode, the intensity returns to the default level 0.
When the device is on, you may press and hold for two seconds to turn
o the device, accompanied by a voice prompt “Bye”.
5. “+” is the intensity increase button and Voice ON key. For each
short-press, the voice prompts corresponding levels such as “level 1”,
“level 2” ......to increase one level. The intensity includes 15 levels
(0, 1, 2 ... 15). Press “+” when the intensity reaches 14 and the voice
prompts: “max.”. Then press “+” again and the voice still prompts “max.”
with unchanged intensity. A long-press “+” turn on voice function.
Press “+” for two seconds to turn on the voice, and voice prompt
“audio mode” is given.