Installation Manual

This flat suction is suitable for cleaning fabric gaps, wall gaps and
corners, or slits that are difficult to handle.
When installing the flat suction, insert its tail into the suction port of the
product until it is installed in place.
Note：Please use the attached charger or other chargers with the
same technical parameters to prevent any harm. In order to achieve
the maximum charging capacity of the battery, the battery should
be fully charged before using it for the first time.
Start the switch button to start operation
1. Remove the outer cover of the dust cup before starting the machine.
Please empty the dust storage cavity and clean it before each use.
2. Press the switch, start the switch, and the vacuum cleaner starts to
run.
3. Press the switch again, turn off the switch, and the vacuum cleaner
stops working.
Clean the vacuum cleaner
How To Operation: