User Manual

1. Attach to your hard drive, the plastic tray that was included and designed for the My
Cloud Home Duo device.
▪
This plastic hard drive tray fits on the underside or circuit board side of the hard
drive.
▪
The end of the tray that is closed and has the latch, must be on the side of the hard
drive with the narrow serial number barcode label.
▪
As is illustrated above, gently flex the plastic tray so that the tiny pins on the insides
of the tray go into the four holes on the sides of the hard drive. Make sure the pins
remain firmly connected to the tray.
2. Once the tray is attached, slide the drive into the My Cloud Home Duo device.
▪
Orientation Note: The tray should slide in easily. Do not force it. The side of the hard
drive with the SATA connector and power connector, must point down into the unit.
The side of the hard drive with the small serial number barcode label must face up.
The latch must be on the side of the tray that is closest to the rear panel of the unit.
▪
The drive is completely inserted once the plastic latch connects or latches into the
metal chassis of the unit.
3. Re-attach the top cover of the My Cloud Home Duo device.
▪
Note that one end has curved hinges that go in first – then press down on the other
side of the lid until it is flush with the top of the My Cloud Home Duo unit.
Additional Features & Functions
My Cloud Home / My Cloud Home Duo
User Manual
24