User Manual

1. As is illustrated above, reveal the hard drives by opening the top lid from the rear edge.
2. Each hard drive is latched in place by an attached tray and the tray has a plastic latch
on one end.
▪
Gently press down on the plastic latch with your index finger so that it unlatches from
the metal frame of the device.
▪
While gently pressing down on the plastic latch, grab the plastic tray with your
fingertips and gently pull. The tray and hard drive should easily lift up or slide out.
3. Once the hard drive and tray combination are completely removed from the unit, remove
the plastic tray from the hard drive.
▪
The tray is attached to the hard drive with four pins.
▪
As is illustrated above, gently flex the tray so that the pins come out of the sides of
the hard drive. Remove and save the tray. Do not return a hard drive to WD with the
tray. The tray will not be returned to you.
Adding
Before adding a hard drive to your My Cloud Home Duo device, make sure there is no hard
drive in the slot where it will be installed. If you need to first remove a hard drive, follow the
instructions above.
Additional Features & Functions
My Cloud Home / My Cloud Home Duo
User Manual
23