User Manual

CONFIGURING SETTINGS
83
MY CLOUD EX2 ULTRA PRIVATE CLOUD STORAGE
USER MANUAL
Energy Saver
The Energy Saver fields allow you to reduce the energy required to run your
My Cloud EX2 Ultra device. Use the following information to configure the energy saving
options on your My Cloud EX2 Ultra device.
View or change the following settings:
Drive Sleep
Enabling this function allows the hard drives to go
into standby mode to save power after a
designated period of inactivity. Drive Sleep is
enabled to sleep after approximately 10 minutes by
default.
• To enable/disable Drive Sleep, click the toggle
button
.
LED
Enabling this function allows the device LEDs to go
into standby mode to save power. LED is enabled
by default.
• To enable/disable LED, click the toggle button
.
Power Recovery
Automatically restarts your device from a previously
unexpected shutdown due to power failure. Power
Recovery is enabled by default.
Note: If you disable this feature, your device will
not automatically power on after an
unexpected shutdown.
• To enable/disable Power Recovery, click the
toggle button
.
Power Schedule
The Power Schedule allows you to schedule
shutdowns for your My Cloud EX2 Ultra device.
1. To enable Power Schedule, click the toggle
button
.
2. Click Configure.
3. Use the slider bar to configure the start and
stop times for your device.
4. Click
to send the device into hibernate.
5. Click Save.