User Guide

ManualsBrandsWD-40 ManualsHardware Lubricants11018

Page 1 of 5

Safety Data Sheet

1 - Identification

Product Name: WD-40 Multi-Use Product TRIGGER

PRO – 50 State Compliant

Product Use: Lubricant, Penetrant, Drives Out

Moisture, Removes and Protects Surfaces From

Corrosion

Restrictions on Use: None identified

SDS Date Of Preparation: 07/31/2014

Manufacturer: WD-40 Company

Address: 1061 Cudahy Place (92110)

P.O. Box 80607

San Diego, California, USA

92138 –0607

Telephone:

Emergency only: 1-888-324-7596 (PROSAR)

Information: 1-888-324-7596

Chemical Spills: 1-800-424-9300 (Chemtrec)

1-703-527-3887 (International Calls)

2 – Hazards Identification

Hazcom 2012/GHS Classification:

Flammable Liquid Category 3

Aspiration Toxicity Category 1

Note: This product is a consumer product and is labeled in accordance with the US Consumer Product

Safety Commission regulations which take precedence over OSHA Hazard Communication labeling. The

actual container label will not include the label elements below.

Label Elements:

DANGER!

Flammable liquid and vapor.

May be fatal if swallowed and enters airways.

Prevention

Keep away from heat, sparks, open flames, hot surfaces – No smoking.

Keep container tightly closed.

Ground and bond containers and receiving equipment.

Use explosion-proof electrical equipment.

Use only non-sparking tools.

Take precautionary measures against static discharge.

Wear eye protection.

Response

IF SWALLOWED: Immediately call a POISON CENTER or physician.

Do NOT induce vomiting.

IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water.

In case of fire: Use water fog, dry chemical, carbon dioxide or foam to extinguish.

Storage

Store locked up.

Store in a well-ventilated place. Keep cool.

Disposal

Dispose of contents and container in accordance with local and national regulations.

Summary of content (5 pages)

PAGE 1
Safety Data Sheet 1 - Identification Product Name: WD-40 Multi-Use Product TRIGGER PRO – 50 State Compliant Product Use: Lubricant, Penetrant, Drives Out Moisture, Removes and Protects Surfaces From Corrosion Restrictions on Use: None identified Manufacturer: WD-40 Company Address: 1061 Cudahy Place (92110) P.O.
PAGE 2
3 - Composition/Information on Ingredients Ingredient CAS # LVP Aliphatic Hydrocarbon 64742-47-8 Aliphatic Hydrocarbon 64742-47-8 Weight Percent 40-50 <25 Petroleum Base Oil 64742-56-9 64742-65-0 64742-53-6 64742-54-7 64742-71-8 Non-Hazardous Ingredients Mixture Note: The exact percentages are a trade secret.
PAGE 3
8 – Exposure Controls/Personal Protection Chemical Occupational Exposure Limits LVP Aliphatic Hydrocarbon 1200 mg/m3 TWA (manufacturer recommended) Aliphatic Hydrocarbon 1200 mg/m3 TWA (manufacturer recommended) Petroleum Base Oil 5 mg/m3 (inhalable) TWA ACGIH TLV 5 mg/m3 TWA OSHA PEL None Established Non-Hazardous Ingredients The Following Controls are Recommended for Normal Consumer Use of this Product Engineering Controls: Use in a well-ventilated area.
PAGE 4
11 – Toxicological Information Symptoms of Overexposure: Inhalation: High concentrations may cause nasal and respiratory irritation and central nervous system effects such as headache, dizziness and nausea. Intentional abuse may be harmful or fatal. Skin Contact: Prolonged and/or repeated contact may produce mild irritation and defatting with possible dermatitis. Eye Contact: Contact may be irritating to eyes. May cause redness and tearing. Ingestion: This product has low oral toxicity.
PAGE 5
California Safe Drinking Water and Toxic Enforcement Act (Proposition 65): This product does not contain chemicals regulated under California Proposition 65. VOC Regulations: This product complies with the consumer product VOC limits of CARB, the US EPA and states adopting the OTC VOC rules. Canadian Environmental Protection Act: One of the components is listed on the NDSL. All of the other ingredients are listed on the Canadian Domestic Substances List or exempt from notification.