MSDS

ManualsBrandsWD-40 ManualsTools & Hardware18 oz. MP Lube-Penetrant

Page 1 of 4

Material Safety Data Sheet

1 - Chemical Product and Company Identification

Manufacturer: WD-40 Company

Address: 1061 Cudahy Place (92110)

P.O. Box 80607

San Diego, California, USA

92138 –0607

Telephone:

Emergency only: 1-888-324-7596 (PROSAR)

Information: 1-888-324-7596

Chemical Spills: 1-800-424-9300 (Chemtrec)

1-703-527-3887 (International Calls)

Chemical Name: Organic Mixture

Trade Name: WD-40 Aerosol

Product Use: Lubricant, Penetrant, Drives Out

Moisture, Removes and Protects Surfaces

From Corrosion

MSDS Date Of Preparation: 3/11/10

2 – Hazards Identification

Emergency Overview:

DANGER! Flammable aerosol. Contents under pressure. Harmful or fatal if swallowed. If swallowed, may be

aspirated and cause lung damage. May cause eye irritation. Avoid eye contact. Use with adequate ventilation.

Keep away from heat, sparks and all other sources of ignition.

Symptoms of Overexposure:

Inhalation: High concentrations may cause nasal and respiratory irritation and central nervous system effects

such as headache, dizziness and nausea. Intentional abuse may be harmful or fatal.

Skin Contact: Prolonged and/or repeated contact may produce mild irritation and defatting with possible

dermatitis.

Eye Contact: Contact may be irritating to eyes. May cause redness and tearing.

Ingestion: This product has low oral toxicity. Swallowing may cause gastrointestinal irritation, nausea,

vomiting and diarrhea. This product is an aspiration hazard. If swallowed, can enter the lungs and may cause

chemical pneumonitis, severe lung damage and death.

Chronic Effects: None expected.

Medical Conditions Aggravated by Exposure: Preexisting eye, skin and respiratory conditions may be

aggravated by exposure.

Suspected Cancer Agent:

Yes No X

3 - Composition/Information on Ingredients

Ingredient

CAS #

Weight Percent

Aliphatic Hydrocarbon

64742-47-8

45-50

Petroleum Base Oil

64742-58-1

64742-53-6

64742-56-9

64742-65-0

<25

LVP Aliphatic Hydrocarbon

64742-47-8

12-18

Carbon Dioxide

124-38-9

2-3

Surfactant

Proprietary

Non-Hazardous Ingredients

Mixture

<10

4 – First Aid Measures

Ingestion (Swallowed): Aspiration Hazard. DO NOT induce vomiting. Call physician, poison control center

or the WD-40 Safety Hotline at 1-888-324-7596 immediately.

Eye Contact: Flush thoroughly with water. Remove contact lenses if present after the first 5 minutes and

continue flushing for several more minutes. Get medical attention if irritation persists.

Summary of content (4 pages)

PAGE 1
Material Safety Data Sheet 1 - Chemical Product and Company Identification Manufacturer: WD-40 Company Address: 1061 Cudahy Place (92110) P.O.
PAGE 2
Skin Contact: Wash with soap and water. If irritation develops and persists, get medical attention. Inhalation (Breathing): If irritation is experienced, move to fresh air. Get medical attention if irritation or other symptoms develop and persist. 5 – Fire Fighting Measures Extinguishing Media: Use water fog, dry chemical, carbon dioxide or foam. Do not use water jet or flooding amounts of water. Burning product will float on the surface and spread fire.
PAGE 3
Personal Protection: Eye Protection: Safety goggles recommended where eye contact is possible. Skin Protection: Wear chemical resistant gloves. Respiratory Protection: None required if ventilation is adequate. If the occupational exposure limits are exceeded, wear a NIOSH approved respirator. Respirator selection and use should be based on contaminant type, form and concentration. Follow OSHA 1910.134, ANSI Z88.2 and good Industrial Hygiene practice.
PAGE 4
CERCLA 103 Reportable Quantity: This product is not subject to CERCLA reporting requirements, however, oil spills are reportable to the National Response Center under the Clean Water Act and many states have more stringent release reporting requirements. Report spills required under federal, state and local regulations.