Specifications

WAPC250 | WAPC250G
AUTOMATIC ON/OFF WATER REMOVAL POOL COVER PUMP
• iSwitch
®
technology turns pump on and off by sensing the presence of water
• Plug in, and leave unattended for worry-free water removal
• Strainer base filters debris to minimize clogging and keep pump from tipping over
• Max. flow rate is 3000 Gallons Per Hour; 1850 GPH at 10 ft. of discharge lift (using 1-1/4 in. drain hose)
• Automatic freeze protection within the iSwitch
®
technology to prevent pump damage
• 25 foot power cord (always plug into a GFCI outlet)
• WAPC250G model has GFCI protected plug
• 25 foot "pull to shore" rope included to help position the pump on the pool cover
• Check-valve with 3/4 in. garden hose adapter included to reduce repetitive cycling
34
Customer Service: 1-800-237-0987
Web Site: www.waynepumps.com
WIP90 | WIP150
IN AND ABOVE GROUND POOL PUMP
• .9 HP Pumps up to 720 gallons (WIP90)
• 1-1/2 HP Pumps up to 41,000 gallons (WIP150)
• Self-priming, high efficiency dual voltage motor (120/240 volts)
• Factory set for 240 volts
• Large capacity strainer with clear view lid for quick cleaning
• Standard 1-1/2 in. NPT suction/discharge for easy installation
25
20
15
10
5
0
2500200015001000 3000
TOTAL DYNAMIC HEAD (FT.)
FLOW RATE IN GPH
PERFORMANCE
Model GFCI Included Construction Limited Warranty HP Discharge Head
Max
Flow
5 ft. 10 ft. 15 ft.
WAPC250 Not Included Thermoplastic 3 Years 1/4 Gallons/Hour 3000 2600 1850 900
WAPC250G Included Thermoplastic 3 Years 1/4 Gallons/Hour 3000 2600 1850 900
WAPC250
WAPC250G
WIP90 | WIP150WAPC250 | WAPC250G