Specifications

The World’s Leading Radon Fan Manufacturer for Over 21 Years
RADON FANS
GP SERIES BY RADONAWAY
™
FEATURES
TECHNICAL DRAWINGS
TECHNICAL TIP
FAN SPECIFICATIONS
• Quiet Operation
• Water-hardened motor
• Seams sealed under negative pressure to
inhibit radon leakage
• Mounts on duct pipe or with integral ange
• 3” diameter ducts for use with 3” or 4” pipe
• Electrical box for hard wire or plug in
• ETL Listed - for indoor or outdoor use
• 4 interchangeable GP models
MODEL
FAN DUCT
DIAMETER
WATTS
MAX.
PRESSURE “WC
TYPICAL CFM vs. STATIC PRESSURE WC
1.0” 1.5” 2.0” 2.5” 3.0” 3.5” 4.0”
GP201 3” 40-60 2.0 82 58 5 - - - -
GP301 3” 55-90 2.6 92 77 45 10 - - -
GP401 3” 60-110 3.4 93 82 60 40 15 - -
GP501 3” 70-140 4.2 95 87 80 70 57 30 10
10
Made in USA with US and imported parts
All RadonAway™ inline radon fans are covered by
our 5-year, hassle-free warranty
ETL Listed
“What happens if I stack one fan on top of the other?” This is a question
we hear often. Mounting two fans in a series will certainly affect the
performance of the overall system but may also affect the service life
of the fans. In general, the static capability of two fans is doubled but
the airow remains about the same.
Stacking fans can be useful in dealing with very tight subsoils but
BEWARE that the heat generated in Fan 2 is input to Fan 1, which may
cause the fan to run hot and reduce the service life of the fan. If you
do stack fans, ensure that you provide adequate airow through the
fan to keep the bearings and the motor windings cool to avoid
customer complaints and warranty problems.
Call RadonAway™ for more tips on this topic.
Flexible Couplings, see p. 17
Indoor Installation Outdoor Installation
Sizing