Brochure

© 2020 Wayne Pumps
5
SUMP
Submersible Sump Pumps
Minimum 11 in. - Vertical Float
Minimum 14 in. - Tether Float
GFCI Outlet
(recommended)
Discharge
Pipe
Vertical
Float
Inlet
Vent
Pipe
Submersible
Sump Pump
Check Valve
On Level
9 in. (approx.)
Off Level
4 in. (approx.)
On Level 14 in.
(approx) (Tether Float)
Off Level 7 in.
(approx) (Tether Float)
Tether
Float
A sump pump is an automatic pump used
to remove ground water from a sump pit.
The most common application is
basement drainage to prevent
residential flooding.
Features
Top suction pump design eliminates air locks and
clogging from debris in bottom of sump pit
Fully submersible
1-1/2 in. NPT discharge for standard plumbing installation
Durable construction materials
Installation Highlights:
If replacing an existing pump, remove the old pump carefully.
Place the new unit on a solid, level foundation in the drained,
clean sump pit. Connect the check valve to the discharge
pipe and tighten the hose clamps.
Place the discharge pipe so it carries water several feet away
fromthefoundation.Pluginthepowerandllthepitwith
water. It will then start automatically at the preset level.
Diameter of Your Sump Pit?
If your Sump basin is between 11 in. and 14 in. wide,
youmayuseapumpwithaverticaloat.Largersumpbasins
canaccommodateeitheraoatoratether.
Typical Tether and Vertical Float Features
On/Olevelsvarybymodel,seeproductdescription
for details. Remember to place the discharge pipe so it
carries water several feet away from the foundation.