Technical Specifications

MODEL: SEL50, 1/2 HP

WAYNE Tether Operated

Sewage Pump

SEWAGE PUMP

WAYNE

BENEFITS

This pump is assembled in the USA

to deliver dependable performance

that lasts for years.

Bottom suction designs allows this pump

to pass 2 in. solids.

Quality and Reliability. Warrantied.

Pump Part # 57333-WYN4

CONSTRUCTION

Reinforced Corrosion Resistant

Thermoplastic Construction

Combination 2 in. Outer Diameter and

3 in. Inner Diameter Discharge Pipe

Reliable Thermoplastic Impeller for

Maximum Water Flow

For Use in 18 in. Diameter or

Larger Sewage Basins

PAGE 1
MODEL: SEL50, 1/2 HP SEWAGE PUMP WAYNE Tether Operated Sewage Pump CONSTRUCTION Reinforced Corrosion Resistant Thermoplastic Construction Combination 2 in. Outer Diameter and 3 in. Inner Diameter Discharge Pipe Reliable Thermoplastic Impeller for Maximum Water Flow For Use in 18 in. Diameter or Larger Sewage Basins BENEFITS This pump is assembled in the USA to deliver dependable performance that lasts for years. Bottom suction designs allows this pump to pass 2 in. solids. Quality and Reliability.
PAGE 2
WAYNE TETHER OPERATED SEWAGE PUMP MODEL: SEL50, 1/2 HP SEWAGE PUMP PUMP SNAPSHOT HP - 1/2 HP Construction - Thermoplastic Switch Type - Tether Motor - 120V PSC Oil-Filled Impeller - Vortex Intake - Bottom Suction Discharge - 2 in. / 3 in. Submersible - Fully Submersible UPC - 040066201256 PUMP SPECIFICATIONS Length - 10 In. Width - 6 In. Height - 13 In. Weight - 26 Lbs. Power Cord - 8 Ft. PERFORMANCE SEL50 - 1/2 HP - Max Flow 10,000 GPH: 9,000 GPH @ 5ft.