Use and Care Manual

Control the fan speed. Press to select either High or Normal fan speed. A higher fan speed will result
in quicker moisture removal.
tank
tanktank
FULL TANK Indicator Light
Compressor starts after the fan work for a few seconds.
Compressor shuts down at once, and the fan will stop after a few seconds. (When other
malfunction occurs, or the humidity reaches desired level, the fan will stop after tens of seconds).
Fault Phenomenon Analysis of Causes Processing Method
Humidity always shows "25% RH"
— but there is a big difference from
the actual humidity.
Set the humidity to 30%RH,the dehumidifier
can still continue to work, and can be used
normally.
The dehumidifier is not affected and can
continue to work, and can be used normally.
Please let the dehumidifier keep working for
a period of time, after the water on the
surface of humidity sensor is removed, it will
return to normal.
Humidity always shows "99% RH"
— but there is a big difference from
the actual humidity.
Water on the surface of
humidity sensor?
OPERATION INSTRUCTIONS
Action Description
Tips:
Faults & Protection Codes:
P.06
Set the speed high for maximum removal first, when the humidity has been reduced and quiet
operation is more preferred, you can return the speed back to Normal.