Thank you for purchasing our dehumidifier. wishes that our products and services can bring convenience to your work and life. We highly recommend that you keep the manual for reference if you encounter unexpected events using the unit. Please read the manual carefully to ensure proper use of the dehumidifier. Our dehumidifiers are widely used in family bedrooms, bathrooms, basements, offices and storage rooms, etc.
BEFORE FIRST USE: To prevent any internal damage, it is very important to keep the unit {like this one) upright throughout its journey. Please leave it standing as the picture shown below and outside the box for 24 HOURS before plugging it in.
# Make sure to turn off and unplug the dehumidifier before cleaning. Do not touch the plug with wet hands. # Do not operate or turn off the dehumidifier by plugging in or unplugging the device. Use the control panel instead. = Be sure to run the slopping water hose downward to let the water flow out smoothly. # Do not use If the power cord Is broken or damaged. = Do not place or operate in a wet room such as bathroom or laundry room, which may ba splashed by water.
#If the dehumidifier is knocked over during usa, turn off the dehumidifier and unplug it from the main power supply immediately. Visually inspect the dehumidifier to ensure there is no damage. If you suspect the dehumidifier has been damaged, contact Wayward Customer Service at for repair or replacement. #To reduce the risk of fire or electric shock, do not use this dehumidifier with any solid-state speed control device.
This unit may have been tilted or placed upside down during shipping. To ensure this device works properly, please ensure this ult Is upright for at least 24 hours before initial use. This dehumidifier Is designed to operate with a working environment between 41°F (5°C} and 95°F ‘When using dehumidifier, other objects surrounding the machine at least need kept a distance of 7.
1.) Power Button Press to turn tha dehumidifier on and off. 2.8 Humidity Setting The humidity level can be set within a range of 30%RH to 80%RH in 5% increments. “When it starts to work, it will first automatically detect and show the humidity (and temperature) in the room, then you can press or hold the Setting Button to change the humidity selection in 5% increments.
Set the speed high for maximum removal first, when the humidity has been reduced and quiet operation is more preferred, you can return the speed back to Normal. 5.4) FULL TANK Indicator Light When the tank is full, the light will flash and the machine will automatically shut off. After the wateriness the tank is emptied, put the tank back in place, then the indicator will go out, and the machine will restart. Power on: Compressor starts after the fan work for a few seconds.
There are two ways to remove the collected water: 1. Use the Water Tank When the water tank is full, remove the tank and empty it. Hold both sides of the water Discard the collected water. Re tum water tank to Its original tank with both hands and position. Tha FULL TANK Indicator pull it out gently. will go oft. Continuous Draining Outlet.
2.Continuous Draining Water can be automatically emptied into a floor drain by attaching a draining hose to the may be helpful to remove the water tank first so you can see the connection better. } Note: The inner diameter of draining outlet is 0.33 inches. Water Tank Draining Outlet Rubber Plug Continuous Draining Outlet. ‘When using the drainage hose for continuous drainage, insert the "rubber plug” into the water: tank draining: cutie to prevent water [savage.
WARNING: Turn the dehumidifier off and remove the plug from the wall outlet before cleaning. 1. Clean the Water Tank Wipe down the water tank every 2 weeks. 2. Clean the Air Filter Pull up to remove the alr filter. Clean the filter with water and soft cloth at least once every 30 days. 3.Storing the Dehumidifier When not using the dehumidifier for a long time. -After tuning off the dehumidifier, wait for one day before emptying the water tank.
Check the information below for troubleshooting steps, it will save you time to resolve issues that may happen with the unit. The list includes most of the common cases, but not the results of defective unit, crafts or materials in the unit. If all troubleshooting steps have been exhausted and the issue is still occurring, please feel free to reach out to Wayward Customer Service to get further assistance. AS hot Dehumidifier dogs not work The power cord Is unplugged.
Edifier does not dry it should Clean the air filter. Is the air inlay or air outlet obstructed? Remove the obstruction from the lair inlay or outlet. The dehumidifier size Is too small for application. Increase the quantity of higher capacity dehumidifier. Poor alr circulation. Please leave about 20cm (7.8 inches) around the product. Do rot allow enough time to remove the moisture. [Allow enough time to remove the moisture. When first Installed, allow at least 3-4 days to maintain the desired RH.
Overflow of water on floor Hose to connector or hose connection may be loose. Connect tha hose with tha draining outlet fitly. The water tank has not been installed properly Re-Install the water tank properly. The float of water tank has been stuck. Move the float and let it swing freely. The magnet on the float has come off. Put the magnet in right position. Please contact Wayward Customer Service at if the dehumidifier operates abnormally or does not operate, and the above solutions are not useful.
MODEL PD160B POWER SOURCE 120V ~ 60Hz RATED POWER 230W RATED CURRENT 20A MOISTURE REMOVAL (65°F, 60%RH} 850 Pints/Day MOISTURE REMOVAL (80 °F, 60%RH) 13 Pints/Day MOISTURE REMOVAL (86 °F, 80%RH) 25 Pints/Day MOISTURE REMOVAL (95 °F, 90%RH) 34 Pints/Day INPUT POWER (65°F, 60%RH) 125W INPUT CURRENT (65°F, 60%RH) 12A IEF { 65°F, 60%RH) 1.30 liters/kWh MOTOR FLA 0.
Wayward offers a 12-month warranty to all of our products together with the original proof of purchase when a defect occurred, including those newly purchased and unused, from Wayward or through an authorized reseller, wholly or substantially, or as a result of faulty manufacturing parts, or workmanship during the Warranty Pernod.
