Instructions / Assembly
Pull out the power supply, unscrew the drainage cap, remove the black 
rubber plug, insert the water hose into the continuous drainage port and push 
it back into the water tank.
Connect the power supply to start the operation. The water outlet of the water 
hose should be lower than the continuous drainage port by more than 3.9 
inches, and the water hose cannot be bent.
(Note: The diameter of continuous drainage port is 0.63 inches.)
7.Continuous Drainage
Drainage Cap
Unscrew the drainage 
outlet cap
Remove the Black Rubber 
Plug
Insert the water hose into the 
continuous drainage port.
3










