Instructions / Assembly

Fault Phenomenon
Analysis of Causes
Processing Method
Humidity sensor failure?
Set the humidity to 30%RH, the
dehumidifier can still continue to
work, and can be used normally.
Repair and replace the humidity
sensor.
1. Water on the surface
of the humidity sensor?
2.Humidity sensor failure?
The dehumidifier is not affected
and can continue to work, and
can be used normally.
Repair and replace the humidity
sensor.
Please let the dehumidifier keep
working for a period of time,
after the water on the surface of
humidity sensor is removed, it
will return to normal.
contact Waykar
Customer Service at for [e-mail]
5. Faults & Processing Methods
Humidity always shows
"25%RH"(There is a big
difference from the actual
humidity)
Humidity always shows
"99%RH"(There is a big
difference from the actual
humidity)