Instructions / Assembly

Control the fan speed. Press to select either High or Normal fan speed.
Higher fan speed will result in quicker moisture removal. Set the speed high
for maximum moisture removal. When the humidity has been reduced and
quiet operation is more preferred, set the fan speed back to Normal.
Note: In the DRY mode, the SETTING button and the SPEED button is disabled.
Press the " " button until you see the CONT indicator light up on the
display to select continuous mode. In CONT mode, the dehumidifier will run
continuously until the water tank is full.
When the water tank is full of water, the machine will turn off automatically.
The indicator light " " will flash. After you empty the water from the water
tank, the indicator light " " will turn off. The machine will restart to work.
Caution:
Water tank must be placed in right position, otherwise will cause the
water full alarm.
Convenient Drainage
Auto Drainage: The dehumidifier has continuous drainage outlet where you
can just simply attach the 6.56 ft. hose for continuous draining.
Manual Drainage: When the water tank is full, the "Full Tank" indicator will
light up, the dehumidifier will automatically switch off and will start to turn on
automatically when the tank is emptied and placed back to the unit.
“ "