Thank you for purchasing our dehumidifier. 3 wishes that our products and services can bring convenience to your work and life.We highly recommend that you keep the manual for reference if you encounter unexpected events using the unit. Please read the manual carefully to ensure proper use of the dehumidifier. Our dehumidifiers are widely used In family bedrooms, bathrooms, basements, offices and storage rooms, etc.
BEFORE FIRST USE: To prevent any internal damage, it is very important to keep refrigeration units (like this one} upright throughout their journey. Please leave it standing upright and outside the box for 24 HOURS before plugging it in.
The graphics and functions provided in this manual may not bs the same as the actual product. Please always refer to the actual product. The model of the machine on the manual is for reference only. Please check the corresponding content and operate the machine based on the actual product. The right to interpret the relevant terms belongs to the company.
For your safety, please read and esp the manual properly before or after using the unit. Please use the product in accordance with the instructions in this manual. + Unplug the dehumidifier from the power source when cleaning. “ Do not splash water into tha machine or put it near places where it can be splashed. “ Please do not place the machine near a heating device or dangerous inflammable things. + Do not put your fingers or any hard materials Into the alr Inlet or outlet. + Do not sit on the unit.
Power When the unit is ON, press [POWER] to enable Standby mode. Then the unit stops working and the standby indicator ¢ tums on. When the unit Is OFF, press [POWER] to turn on the unit. Then the unit starts working and the standby Indicator 3 tums off. Humidity Setting When the unit Is ON, press [Up] or [Down] to enter the humidity setting. The humidity display %RH fishes and humidity "BE" flashes to show the level. Press [Setting] again or wait for a wheels, to exit the setting.
Cleaning Setting + Cleaning Time Setting When the unit Is on, hold the button [Cleaning] to enter cleaning setting. The Icon Cleaning lights up, and the number i "displays the cleaning days. Press the button once again or Walt for seconds to exit the setting. In the cleaning setting, press [Up] or [Down] to adjust the cleaning time between 01-99 days (clemency setting). Press [Up] once to increase 1 day while decreasing 1 day by pressing [Down] once.
The compressor and fan will stop working successively when tum off the dehumidifier. The compressor will stop working immediately, and the fan stops working later, whenever the Protection Is triggered, the humidity level set before Is reached, or breakdown occurs. Compressor 3 Minutes Delay Protection: After the unit has stopped, it can not be restarted in the first 3 minutes to protect compressor operation. The unit will restart automatically after 3 minutes.
1 El Change the sensor and connecting cable of the R HI-112A port. 2 E2 Change the temperature sensor of PTI port. 3 B ‘Make sure the water tank is well placed, and the WF port is properly connected. 4 E4 Change the sensor and connecting cable of the R HI-112A port. 5 5% Make sure the display circuit has been connected right, and the DISPLAY port is well connected. 6 -H No problem. The unit resumes working when unit temperature goes down. , + No problem.
Tum the dehumidifier off and remove the plug from the wall outlet before cleaning. A. Housing Washing Do not use volatile chemicals, gasoline, detergent, or other related detergents to clean the exterior, for they may damage the coating to accurate the corrosion. B. Filter Cleaning It's advised to clean the filter regularly and properly. Make sure clean the filter at least once a month. Clean the unit thoroughly before idling the unit for long time, to prevent bacteria and mold breed. 1.
Check the information below for troubleshooting steps, it will save you time to resolve issues that may happen with the unit. The list includes most of the common cases, but not the results of defective unit, crafts or materials in the unit. If all troubleshooting steps have been exhausted and the issue is still occurring, please feel free to reach out to Wayward Customer Service to get further assistance.
ws wht Es 735 § dnl 0 not insert thin rads and hard When using, please keep the objects into the machine body to machine away from heating uneven ground, avoid vil avoid malfunction and danger. fum ace, electric kettle and and movement. other heat sources. do not use the product for a long time, please unplug the se close doors and windows to achieve the best the body. If the vent] remove humidity effect. blocked, the humidification power cord. affect will be affected.
MODEL DPS$00B POWER SOURCE 115V~60Hz TOTAL INPUT CURRENT 11.34 MOISTURE REMOVAL 72 Pints/Day (34L/Day) MOISTURE REMOVAL 115 Pints/Day (54L/Day) MOISTURE REMOVAL 180 Interplay (90L/Day)} MOISTURE REMOVAL 216 Pints/Day (102L/Day) INPUT POWER 790W INPUT CURRENT 8.1A MOTOR FLA 1.2A MOTOR COMPRESSOR (RLA/LRA) LRA4TA REFRIGERANT R410a/650g MAXIMUM ALLOWABLE PRESSURE 5.5MPa {800 PSI) HIGH PRESSURE 4.0MPa {580 PSI) LOW PRESSURE 1.
Wayward offers a 12-month warranty to all of our products together with the original proof of purchase when a defect occurred, including those newly purchased and unused, from Wayward or through an authorized reseller, wholly or substantially, or as a result of faulty manufacturing parts, or workmanship during the Warranty Period.
