Installation & Assembly

ManualsBrandsWayfair Basics ManualsGarage & Outdoor Storage & Organization65" H x 32" W x 20" D Wardrobe Cabinet

Elite 32” Wardrobe Cabinet

Penderie Elite 32 po

Assembly Instructions

Instructions de montage

• If you have received a damaged or defective part

• If you are missing hardware or parts

• For help with assembly

Replacement parts will leave our facility within two business days

via UPS ground or mail. Please note: shipping times will vary

depending on location.

Before you call please:

1) Record the following information from the shipping label on the

outside of the box. You will need it for warranty purposes:

• Ship To Name

• Sales Order Number

2) Note the product model number.

3) Review the contents of your shipment to determine

what you are missing.

Option de service en ligne

• Si vous avez reçu une pièce endommagée ou défectueuse

• Si vous manquez la quincaillerie ou les pièces

Les pièces de rechange quitteront notre installation dans deux jours

ouvrables via UPS par terre ou le courrier. Notez s’il vous plaît que les

temps d’expédition varieront selon l’emplacement.

Pour parler avec quelqu’un en français, s’il vous plaît contacter

votre détaillant.

IMPORTANT

These instructions are made up of 2 parts:

A) Cabinet Assembly Instructions

B) Installation Instructions (back of this booklet).

Please read ALL instructions before you begin.

IMPORTANT

Ces directives comprennent deux parties :

A) Les directives d’assemblage de l’armoire;

B) Les directives d’installation (au dos de ce dépliant).

Veuillez lire TOUTES les directives avant de débuter.

Summary of content (16 pages)

PAGE 1
Elite 32” Wardrobe Cabinet Penderie Elite 32 po Assembly Instructions Instructions de montage IMPORTANT These instructions are made up of 2 parts: A) Cabinet Assembly Instructions B) Installation Instructions (back of this booklet). Please read ALL instructions before you begin. • • • IMPORTANT Ces directives comprennent deux parties : A) Les directives d’assemblage de l’armoire; B) Les directives d’installation (au dos de ce dépliant). Veuillez lire TOUTES les directives avant de débuter.
PAGE 2
Required Tools / Outils requis Caution Do not over tighten any screw. The last few turns of each screw should be done very slowly or by hand. Optional Tools: Using a power screwdriver will speed up assembly. Attention Évitez de trop serrer les vis. Ralentissez la vitesse de la foreuse pour les derniers deux tours de vis ou vissez-les lentement à la main. Outils facultatifs Utilisant la puissance un tournevis accélérera l’assemblée.
PAGE 3
C1 Top / Bottom Shelf (2) tagère dessus et bas black / noirspresso white / blanc C1 C2 C2 C3 C3 C8 C4 C5 C9 C4 C9 C7 C5 C8 C3 Back Panel (2) Panneau arrière black / noir espresso white / blanc Interior Shelf (2) Étagère intérieure black / noir espresso white / blanc Left Side (1) Côté gauche black / noir espresso white / blanc Right Side (1) Côté droit black / noir espresso white / blanc Front Kicker (1) Renforcement avant black / noir espresso white / blanc C6 C7 C2 Back (1) Dos black / noi
PAGE 4
1 Attach all parts shown with Confirmat Screws. Note the location of the hinge holes. Hinge Holes Fixer toutes les pièces montrées au moyen de vis Confirmat. Repérer l’emplacement des trous à charnière. Hinge Holes Front Devant C5 C1 C3 C2 C6 C4 C3 C2 2 #6 - 5/8” Screw Vis no. 6 - 5/8 po. Note: Screw hole is not pre drilled Noter: Le trou de vis n’est pas perforés d’avance.
PAGE 5
3 C7 Front Devant Page 5 of 16
PAGE 6
4 NOTE: Depending on your installation, you may want to attach the cabinet to the wall or other cabinets before you attach the doors. Refer to the ELITE STORAGE INSTALLATION GUIDE on pages 9-12 REMARQUE : selon le type d’installation choisi, vous pourriez devoir fixer l’armoire au mur ou aux autres armoires avant d’installer les portes. Reportez-vous aux pages 9 à 12 du GUIDE D’INSTALLATION DES MEUBLES DE RANGEMENT ELITE.
PAGE 7
5 Attach hinge plates using the top and bottom two holes on the Left and Right Sides Fixer les plaques de charnière en utilisant les deux trous situés en haut et en bas du côtés gauche et droit de la porte Slide the hinges over the hinge plates on the cabinet and tighten the locking screw in the center of each plate. These hinges are 6 way adjustable (see instructions on page 9). Glisser les plaques de charnière sur les plaques et serrer la vis de verrouillage au centre de chaque plaque.
PAGE 8
6 Attach this warning label to the Wardrobe so that it is always visible Fixez cette étiquette d’avertissement à l’armoire pour qu’elle soit toujours visible. ! WARNING Serious or fatal crushing injuries can occur from the furniture tipover. To help prevent tipover: - Install tipover restraint provided. - Place heaviest items in the lower drawers. - Unless specifically designed to accommodate, do not set TVs or other heavy objects on top of this product.
PAGE 9
Hinge Adjustments Hinges are 6-way adjustable, allowing you to make precise adjustments. Ajustements de charnière Les charnières sont 6-voies réglables, vous permettant d’effectuer des réglages précis. Vertical Door Alignment: Loosen the top & bottom Hinge Plate Screws (on both hinge sets) and move the door up or down. Alignement de la porte verticale: Desserrer le haut & bas plaque charnière vis (sur les deux charnières) et déplacer la porte vers le haut ou vers le bas.
PAGE 10
Securing Free-Standing Storage Cabinets to the Wall Fixation murale d’armoires de rangement autoportantes Follow the steps below to secure individual free standing cabinets to the wall. For full installation of multiple cabinets (for a garage, utility or laundry room application) please see the Installation guide on pages 9-12) Suivre les étapes ci-dessous pour fixer au mur des armoires autoportantes.
PAGE 11
Elite Storage Collection - Planning & Installation Guide Collection de meubles de rangement Elite : Guide de planification et d’installation Before you get started… Read all installation instructions and assemble all cabinets as shown in the Cabinet Assembly portion of these instructions. Avant de débuter Lisez toutes les directives d’installation et assemblez toutes les armoires selon la section visée.
PAGE 12
Laundry Room with 3 Door W all Cabinet (WEW -5424) re inst allation, DO NOT insert the plastic SampleConfigurations Configurations ation isSample complete. At that time, only a few ed cabinet sides. Wall Cabinet s att ached directly to the wall above Base Cabinet s Exemples de configurations nted prior to attaching the doors. S tud Finder vel ardsand plumb. Shims may be necessary es to ed for Inst . allation or wood, etc.
PAGE 13
Basic Installation Storage Cabinets & Stackable Wall Cabinets In free-standing applications, align the stackable wall cabinets on top of the storage cabinets by inserting the metal dowel into the holes on the top of the storage cabinet and the bottom of the wall cabinet. Metal dowels are supplied with the wall cabinets.
PAGE 14
Full Cabinet Installation Requirements: 1. Prepare the Floors 1. Préparation du plancher Remove any moldings, baseboards and other obstructions where the Base Cabinets will be installed. Using your level, check for any high points in the floor. If there are any high points use this as your starting point to measure up the wall as described in step 2. Retirer les moulures, les plinthes et tout autre obstacle se trouvant à l’endroit où seront installées les armoires sur plancher.
PAGE 15
3. Wall Mounting Points Wall and Base Cabinets must be solidly attached to your wall. Make sure that you locate the studs behind the wallboard. Mark where the center of each stud is located and make sure you hit the stud with the 3” wood screws as described in steps 4 & 6. Studs are usually 16” (406mm) apart from the center of one to the center of another. Using a Stud Finder is the easiest way to locate studs. The recommended method of installation is to fasten the cabinets to wooden wall studs.
PAGE 16
5. Fastening Cabinets Together 5. Fixer les armoires entre elles Position the adjoining cabinets in place making sure they are flush. Clamp cabinets together using padded “C” clamps. Pre-drill a 1/8” diameter hole through one cabinet so that it just penetrates the adjoining cabinet. Secure the cabinets together with a 1” flat head wood screw (not supplied). It is best to install these screws just above or below each hinge. Cabinets should now be level and plumb.