Installation & Assembly

x1 — Rack Shelf

x1 — Shelf Support

x1 — Wall Bracket

x3 — Screws

Tool(s) Required

Parts

Phillips Head

Screwdriver

Drill

Assembly instructions

WARNING

NEVER EXCEED MAXIMUM TOTAL WEIGHT LIMIT OF 65 LBS (30 Kgs)

INCORRECT WALL MOUNTING COULD RESULT IN ITEMS FALLING AND INJURY TO PERSONS.

IMPROPER INSTALLATION OR USE CAN RESULT IN PERSONAL INJURY AND/OR DAMAGE TO

PROPERTY

Two Bike

Wall Mount

Rack w/shelf

PAGE 1
Two Bike Wall Mount Rack w/shelf Assembly instructions A B Parts A x1 — Rack Shelf B x1 — Shelf Support C x1 — Wall Bracket D x3 — Screws D Tool(s) Required Phillips Head Screwdriver Drill WARNING NEVER EXCEED MAXIMUM TOTAL WEIGHT LIMIT OF 65 LBS (30 Kgs) INCORRECT WALL MOUNTING COULD RESULT IN ITEMS FALLING AND INJURY TO PERSONS.
PAGE 2
STUD 1 Locate stud beneath wallboard. Position wall bracket at deisred height. Before mouting wall bracket position rack shelf behind upper part of bracket. (Figure 1) Make sure the rack shelf is level when mounting. Once in correct position screw into place. (screws should be in the center or Wall Stud) FIGURE 1 WALLBOARD IMPORTANT SAFETY NOTE Beware of drilling into electrical wire or pipes within wall! 2 Compress shelf support slightly and release into holes on shelf.