Instructions / Assembly

Help and Comments www.waybasics.com/help Share and Win www.waybasics.com/share

Tools needed

21 3

5 6

8 9

Place bracket on wall.Remove the metal bracket from

the wall shelf.

Level bracket.

Drill 8 holes into wall with 1/4 bit. Insert anchors into holes.

Fasten bracket to wall anchors with

screws,

Mark 8 holes onto wall with pencil.

That was easy, wasn’t it?Insert shelf onto bracket.

spacer

Screws x8 Anchors x8

Bracket x1

Shelf x1

Included

Power Drill + 1/4 drill bit

Phillips Screwdriver

Level

WALL SHELVES

PAGE 1
WALL SHELVES Included spacer Shelf x1 Screws x8 Bracket x1 1 Remove the metal bracket from the wall shelf. 2 Place bracket on wall. 3 Level bracket. 4 Mark 8 holes onto wall with pencil. 5 Drill 8 holes into wall with 1/4 bit. 6 Insert anchors into holes. 7 Fasten bracket to wall anchors with screws, 8 Anchors x8 Tools needed Level Phillips Screwdriver Power Drill + 1/4 drill bit Insert shelf onto bracket. Help and Comments www.waybasics.
PAGE 2
IT’S NOT WOOD! Thank you for saving trees Simple Safe World's Easiest Assembly Zero Formaldehyde or VOC Eco 99% recycled 100% recyclable flip for assembly guide Paper products are recycled after use We use this recycled paper to create Thank you for choosing Way Basics. At Way Basics we stand behind our products with a LIFETIME GUARANTEE. Your happiness is important to me and it’s our goal to provide a 5-star-service with every purchase.