Instructions / Assembly

Help and Comments www.waybasics.com/contact

version 0419

CAUTION placing unit on its side or back

will compromise structural integrity. Use

right side up.

Important

Carefully remove the protective

layer on the Vertical zBoards,

making sure not to remove

the 3M adhesive.

Insert pins as shown.

Align Vertical zBoards to

holes in the Bottom zBoard.

Align Back zBoard to holes

in the Bottom zBoard.

40 Pins

2 Horizontal zBoards -

top and bottom

holes on one side only

1 Middle zBoard

holes on top and bottom

10 Vertical zBoards

adhesive strips on 2 edges

• When moving your Way Basics unit, lift from the bottom

• Indoor use only. Not in bathroom.

Included

TV STAND

• Assemble your unit on a ﬂat even surface

• Make sure zBoard surfaces are clean and dry

Align Middle zBoard to Vertical

zBoards as shown. Press firmly.

WARNING: CHOKING HAZARD

Small parts NOT for children under 3 years

Align Vertical zBoards to

holes in the Middle zBoard.

Align Top zBoard as shown

and press firmly to secure

unit together.

Enjoy building possibilities!

THIS SIDE UP

PAGE 1
TV STAND • Assemble your unit on a ﬂat even surface • When moving your Way Basics unit, lift from the bottom • Make sure zBoard surfaces are clean and dry • Indoor use only. Not in bathroom. Included 40 Pins 10 Vertical zBoards adhesive strips on 2 edges 1 Carefully remove the protective layer on the Vertical zBoards, making sure not to remove the 3M adhesive. 21 2 Insert pins as shown. 1 32 3 Align Vertical zBoards to holes in the Bottom zBoard. Align Back zBoard to holes in the Bottom zBoard.