Instructions / Assembly

Watch and Assemble www.waybasics.com/help-super-rectangle Help and Comments www.waybasics.com/contact Share and Win www.waybasics.com/share
Important
Tip Start assembly from bottom to top.
DO NOT place unit on its side or back as
it will compromise its structural integrity.
THIS SIDE UP
1 2
3 4
Carefully remove the 3M protective
layer from adhesive.
Place alignment pins in vertical zBoards.
Align vertical zBoards and backer board
to horizontal zBoard.
Align horizontal zBoard and press firmly to secure
unit together. Visit links below for more details.
Enjoy building possibilities!
2 Horizontal zBoards
with grooves
1 Backer Board
thin and has no adhesive
2 Vertical zBoards
adhesive strips on 2 edges
8 Pins
WARNING: CHOKING HAZARD
Small parts NOT for children under 3 years
Included
SUPER RECTANGLE
• Assemble your unit on a flat even surface, carpet not recommended
• Furniture is for indoor use only
• When moving your Way Basics furniture, lift from the bottom
• Make sure zBoard surfaces are clean and dry