Instructions / Assembly

Thank You!

What’s

Included

Turn this page over to get started!

Thank you for choosing Way Basics! With your help, Way Basics products are helping protect the environment. No

new trees were cut down to create our furniture, because it’s made from recycled paper. At the end of its long life we

hope you’ll find other uses for our zBoards or simply recycle – then they might eventually find their way back to Way

Basics where we’ll make them into new zBoards!

Dowel x16 Vertical zBoard x2 Horizontal zBoard x2

Backboard x1

(with metal fitting)

Wall Attachment x2 Plastic Anchor x6

Screws x6 Drilling Template x1 Glue x1

Hook bracket guide

(28.5 x 28.5 cm)

Hook bracket guide

(50 x 28.5 cm)

Connect

With Us

talktous@waybasics.com

Share Your Photos and Win

www.waybasics.com/share

PAGE 1
Thank You! Thank you for choosing Way Basics! With your help, Way Basics products are helping protect the environment. No new trees were cut down to create our furniture, because it’s made from recycled paper. At the end of its long life we hope you’ll find other uses for our zBoards or simply recycle – then they might eventually find their way back to Way Basics where we’ll make them into new zBoards! What’s Included Dowel x16 Vertical zBoard x2 Horizontal zBoard x2 Hook bracket guide (28.5 x 28.
PAGE 2
Images below are for the Wall Cube. The Wall Rectangle is the same process 1 Apply glue into the pre-drilled holes and insert dowels into horizontal zBoards and backboard. 2 Remove protective strips on horizontal zBoards and backboard. 3 Assemble the horizontal zBoards and backboard.Notice that the metal fitting needs to be on the back. 4 Assemble the vertical board.