Instructions / Assembly

2
3
1
4
5 6
WARNING: CHOKING HAZARD
Small parts NOT for children under 3 years
10 Pins
2 Side zBoards
1 Bottom zBoard
1 Vertical Scratcher
1 Base Scratcher
1 Front zBoard
Glue
Included
STANDING CAT SCRATCHER
Contact Us www.waybasics.com/contact
version 0820
• Assemble your unit on a flat even surface
• Make sure zBoard surfaces are clean and dry
• When moving your Way Basics unit, lift from the bottom
• Indoor use only. Not in bathroom.
Carefully remove the protective layer
on Side zBoard and Bottom zBoard
(making sure not to remove the 3M
adhesive shown in yellow).
Apply glue in all holes before
inserting alignment pins.
Apply glue in all holes and insert
alignment pins. Secure Side zBoards
to the Vertical Scratcher as shown.
Flip product vertically and place
Base Scratcher as shown. Prop
against a wall and scratch away!
Apply glue in all hole and insert
alignment pins. Secure Bottom zBoard
to the Back zBoard as shown.
Apply glue in all holes and insert
alignment pins. Secure Front zBoard
as shown.