Instructions / Assembly

PLUSH ORTHOPEDIC BREATHEABLE DOG BED

USA Customer Care Contact - talktous@waybasics.com 949 229 3304

CLEANING INNER PAD

ASSEMBLY INSTRUCTIONS

1) Take out the inner pad

2) Wash only by hand

3) Water rise or spray

4) Place in ventilated area and avoid

direct sunlight

1) Put in washing bag and warm water wash

2) Do not bleach and use fabric softener

3) Do not iron. Do not tumble dry

CLEANING COVER

IMPORTANT

1) Keep the inner pad away from heat

2) Don’t put an electric blanket on the mat

3) Do not wash bolster

Enjoy

Put the long bolster into long

side then zip up

Put in other two bolsters in order

Put inner pad into the ﬂat cover

then zip up

Each bolster has two wings to cover

the middle pad

Put the short bolster into short

side and zip up the cover

PAGE 1
PLUSH ORTHOPEDIC BREATHEABLE DOG BED ASSEMBLY INSTRUCTIONS CLEANING INNER PAD 1) Take out the inner pad 2) Wash only by hand 3) Water rise or spray 4) Place in ventilated area and avoid direct sunlight 1 Put inner pad into the ﬂat cover then zip up 2 Put the short bolster into short side and zip up the cover 3 Each bolster has two wings to cover the middle pad 4 Put the long bolster into long side then zip up 5 Put in other two bolsters in order 6 Enjoy CLEANING COVER 1) Put in washing bag and