Instructions / Assembly

Watch and Assemble www.waybasics.com/help-super-cube Help and Comments www.waybasics.com/contact Share and Win www.waybasics.com/share

Important

Tip Start assembly from bottom to top.

DO NOT place unit on its side or back as

it will compromise its structural integrity.

THIS SIDE UP

1 Carefully remove the 3M

protective layer from adhesive.

2 Place alignment pins

in vertical zBoards.

Align vertical zBoards and backer

board to horizontal zBoard.

Align horizontal zBoard and press ﬁrmly to secure

unit together. Visit links below for more details.

Enjoy building possibilities!

1 Backer Board

thin and has no adhesive

2 Horizontal zBoards

with grooves

2 Vertical zBoards

adhesive strips on 2 edges

8 Pins

WARNING: CHOCKING HAZARD

Small parts NOT for children under 3 years

Included

SUPER CUBE

• Assemble your unit on a ﬂat even surface, carpet not recommended

• Furniture is for indoor use only

• When moving your Way Basics furniture, lift from the bottom

• Make sure zBoard surfaces are clean and dry

PAGE 1
SUPER CUBE • Assemble your unit on a ﬂat even surface, carpet not recommended • When moving your Way Basics furniture, lift from the bottom • Furniture is for indoor use only • Make sure zBoard surfaces are clean and dry Included 8 Pins 1 Backer Board thin and has no adhesive 2 Vertical zBoards adhesive strips on 2 edges 1 Carefully remove the 3M protective layer from adhesive. 3 Align vertical zBoards and backer board to horizontal zBoard. 2 Place alignment pins in vertical zBoards.