Owner's Manual
~CAUTION
• STOP USE IMMEDIATELY IF A PROBLEM OCCURS. Failure
to
do
so
may
result
in
personal injury
or
damage
to
the
product. Return
it
to
your
authorized wavtech dealer.
• HAVE
AN
EXPERT
DO
THE WIRING
AND
INSTALLATION. This
unit
requires special
technical skill and experience for wiring and installation.
To
insure
safety
and
proper
function, always contact
the
authorized dealer where you purchased the product
to
have
it
done
professionally.
• INSTALL THE
UNIT
SECURELY
WITH
SPECIFIED PARTS.
Be
sure
to
use only
the
included parts and specified installation accessories
(not
included).
Use
of
other
than
designated
parts
may
damage
this unit. Install
the
unit securely so
that
it
will
not
come
loose during a collision
or
sudden
jolt
.
• ROUTE WIRING AWAY FROM SHARP EDGES
AND
MOVING
PARTS. Arrange cables and
wiring away from sharp
or
pointed edges and avoid moving parts such
as
seat hinges
or
rails to
prevent
pinching
or
wear. Use loom protection
where
appropriate
and always use
a
grommet
for
any wiring routed
through
metal.
• NEVER
RUN
SYSTEM WIRING OUTSIDE OR UNDERNEATH THE VEHICLE. All
wiring
must
be routed, secured and
protected
inside the vehicle. Failure
to
do
so may result in
fire,
injury
or
property
damage .
• INSTALL THE
UNIT
IN A DRY
AND
VENTILATED LOCATION. Avoid
mounting
locations
where
the
unit
will
likely be exposed
to
high moisture
or
heat
without
adequate
ventilation. Moisture
penetration
or
heat buildup may result in
product
failure.
• REDUCE GAIN
AND
SOURCE VOLUME TO
MINIMUM
LEVELS
FOR
INITIAL
SYSTEM
TUNING
AND
BEFORE CONNECTION
TO
AN
AMPLIFIER. Ensure
amplifier
power
is
off
before
connecting
RCA
cables and
follow
proper
system gain
setting
procedures. Failure
to
do
so
may
result
in damage
to
the
amplifier
and/or
connected components.
Package Contents:
Main
Unit
Terminals
~!tr
PWR/SPK
GND
M~~e~~~~1~1bs
~~
Accessories Required
for
Installation (not included):
RCA
Interconnects
18AWGWire
In-line
Fuse
Holder
w/1A
fuse
Battery
Ring Terminal
Wire Crimp Connectors
Grommets and Loom
Cable Ties
Mounting
Screws
2