bassRESTOR Bass Restoration Processor / LOC / Line Driver Complete Tuning Control Ÿ Auto Turn-On Ÿ Multi-Function Remote Owner’s Manual www.wavtech-usa.
This symbol means important instructions. Failure to heed them can result in serious injury or death. This symbol means important instructions. Failure to heed them can result in injury or property damages. WARNING CAUTION WARNING • DO NOT DRIVE WHILE DISTRACTED. Any function that requires your prolonged attention should not be performed while driving. Always stop the vehicle in a safe location before performing any such function. Failure to do so may result in an accident.
Introduction Welcome to Wāvtech, exceptional mobile audio integration products for audiophiles. Our products are engineered to provide a truly remarkable listening experience. Built for the professional installer, our OEM integration and signal processor models are simply the best solution available for unlimited sound system upgrades while retaining the factory receiver or with an aftermarket source.
Installation & System Wiring It is important to read this manual thoroughly before starting your installation and always plan accordingly. Before installing any Wāvtech product, disconnect the negative (ground) wire from the vehicle’s battery to avoid damage to the vehicle or yourself. Following all guidelines will help provide years of enjoyment with your Wāvtech bassRESTOR audio interface.
Example-3: RCA Input from Aftermarket Radio +12V RLC REM IN bassRESTOR GND BASS PROCESSOR EFFECT MID MIN MAX 50 MED NAR WIDE 30 30 80 15 50 RCA IN REM OUT RCA OUT Note: If the source’s output signal is full-range and the bassRESTOR is being used for subwoofer(s) only, a low-pass filter will need to be engaged at the amplifier to filter out unwanted higher frequencies.
Remote Adjustments Œ Bass Restoration On/Off: By short pressing the main knob, the bass Ž restoration circuit can be activated or completely bypassed. This function provides quick ability to defeat the effect for music content that already has enough bass without changing the bass effect level setting from the outer ring. The LED will be illuminated only when bass restoration is on.
Installation Notes Vehicle Description Ÿ Year, Make, Model: Ÿ Trim Level / Package: OEM Audio System Info Ÿ Head Unit (type, BT/AUX in, etc.): Ÿ Speakers (size/location, etc.): Ÿ Subwoofer(s) (size/location, etc.): Ÿ Amplifier(s) (location, output voltage, etc.): Ÿ Other: bassRESTOR Connections & Settings Ÿ Installed Location: Ÿ Wiring (connection locations, signal type, turn-on mode, etc): Ÿ Settings (gain, max master vol, crossover, etc.
v1118 7931 E. Pecos Rd Suite 113 Mesa, AZ 85212 (480) 454-7017 ©Copyright 2018 Wāvtech, LLC. All Rights Reserved.
