bassRESTOR Bass Restoration Processor/ LOC / Line Driver Complete Tuning Control • Auto Turn-On • Multi-Function Remote Owner's Manual bassRESTOR □0 □0 □0 □0 £\;:, 0 □ □ □ □ 0 wavtech 0 0 8 0 0 ® ~ - B A S S PROCESSOR-~ CLIP GAIN EFFECT WIDTH FREQ SUBSONIC ® ® ® I® MIN MAX NAR WIDE 30 (H,) 80 15 (H,) SO ----i:±=====---...:.....:....__ _ _ _ _ _ _ - - - - - ' = ' www.wavtech-usa.
&WARNING &CAUTION This symbol means important instructions. Failure to heed them can result in serious injury or death. This symbol means important instructions. Failure to heed them can result in injury or property damages. &wARNINCi • DO NOT DRIVE WHILE DISTRACTED. Any function that requires your prolonged attention should not be performed • • • • • • • while driving. Always stop the vehicle in a safe location before performing any such function. Failure to do so may result in an accident.
Introduction Welcome to Wavtech, exceptional mobile audio integration products for audiophiles. Our products are engineered to provide a truly remarkable listening experience. Built for the professional installer, our OEM integration and signal processor models are simply the best solution available for unlimited sound system upgrades while retaining the factory receiver or with an aftermarket source.
Installation & System Wiring It is important to read this manual thoroughly before starting your installation and always plan accordingly. Before installing any Wavtech product, disconnect the negative (ground) wire from the vehicle's battery to avoid damage to the vehicle or yourself. Following all guidelines will help provide years of enjoyment with your Wavtech bassRESTOR audio interface.
Example-3: RCA Input from Aftermarket Radio Eo l oo _0000000:c 0 REMIN GND • REM OUT Note: If the source's output signal is full-range and the bassRESTOR is being used for subwoofer(s) only, a low-pass filter will need to be engaged at the amplifier to filter out unwanted higher frequencies. Additionally, unless the amplifier already has an adequate subsonic filter, set the bassRESTOR's subsonic filter appropriately to prevent over-excursion.
Remote Adjustments 0 Bass Restoration On/Off: By short pressing the main knob, the bass restoration circuit can be activated or completely bypassed. This function provides quick ability to defeat the effect for music content that already has enough bass without changing the bass effect level setting from the outer ring. The LED will be illuminated only when bass restoration is on.
Installation Notes Vehicle Description • Year, Make, M o d e l : - - - - - - - - - - - - - - - - - - - - - - - - - - - - - • Trim Level/ Package: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ OEM Audio System Info • Head Unit (type, BT/AUX in, etc.): _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ • Speakers (size/location, etc.): - - - - - - - - - - - - - - - - - - - - - - - - - - - • Subwoofer(s) (size/location, etc.
v0219 Wavtech® 7931 E. Pecos Rd Suite113 Mesa, AZ 85212 {480) 454-7017 ©Copyright 2019 Wavtech, LLC. All Rights Reserved.
