User manual

Appendix: Quick Start Guide to Wavion WS410
100 Wavion
Setting the Encryption Type
In the Encryption field, from the dropdown list; default is None.
Saving Changes
1. Click Apply.
2. Click Save.
Rebooting the System
Several of the changes made during the quick start procedure require rebooting to take
effect. After completing the procedure, reboot the system.
To reboot the WS410
1.
From the menu, click System.
The System Configuration page displays.
Figure 9.7. System Configuration Page
2. Click Reboot.
This system reboots and puts into effect all changes that were made and required reboot.
It takes about one minute for the system to come back up again after reboot.