User manual

Appendix: Quick Start Guide to Wavion WS410
98 Wavion
Dynamic Interference Handling
Refer to Chapter 4 for definition. The DIH provides which Channel to use based on he Total
CCA Activity and the Noise Level. These values are only valid seven minutes after reboot and
when the First System Calibration is complete. It can be configured Dynamically or Static
Mode.
Saving Changes
1. Click Apply.
2. Click Save.
You are warned that it is necessary to reboot before the changes take effect. We will do
this at the end of the quick start.
Click Home to return to Home page to continue the quick start procedure.
Automatic Channel Selection
The Automatic Channel Selection (ACS) is a tool to select the best channel based on the
activity and the interference level at each channel by scanning the frequency channel.
Figure 9.5. Automatic Channel Selection page