User manual

Appendix: Quick Start Guide to Wavion WS410
Rev 1.1.0 User Manual 95
Modifying the System Configuration
From the Home page, click System Identity. (You can also get to this page by clicking System
from the menu bar.)
The System Configuration page is displayed.
Figure 9.3. System Configuration Page.
This page contains basic static information on the system, such as contact details, and IP
addresses. Several changes are recommended on this page.
Setting System Contact Details
In the System Identity area, in the System Contact field, enter the contact E-mail address of
the NOC or network owner.
Setting the IP Address Configuration
Change the IP address to allow the full configuration. The Current IP Address Configuration
area lists a default IP address; it is possible to perform initial testing with this address, but it
is highly recommended to change the IP address. The default IP Address of the unit from the
box is 192.168.1.1 using /24 bit mask.
To change the IP address
In the Configured IP Address Configuration section,