User manual

Appendix: Quick Start Guide to Wavion WS410
90 Wavion
CHAPTER 9
Appendix: Quick Start Guide to Wavion WS410
This section explains how to quickly get started using the Wavion WS410. The intended
audience for this guide is trained technical professionals. The following topics are covered in
this guide:
• Introduction
• Connecting the WS410 to a PC
• Log In
• Becoming Oriented with the Application
• Modifying the System Configuration
• Changing the Network Interface Configuration
• Automatic Channel Selection
• Modifying the Security Configuration
• Rebooting the System
Introduction
The Wavion WS410 was designed so that it works straight “out-of-the-box”. It can start
operating without any configuration changes. However, we advise that you make some
configuration changes that affect the wireless security and networking settings before
testing.
This quick start guide directs you to the specific parameters that you need to change.
Connecting the WS410 to a PC
You must connect the WS410 to a PC.
To connect the WS410 to a PC
1.
Connect the WS410 to a source of electricity.
2. Connect the WS410 to the local area connection port of the PC.
3. Right-click the Local Area Connection icon in the notification area (system tray).
A menu is displayed.