User manual

Viewing Events
Rev 1.1.0 User Manual 83
Configuring Event Logs
You can configure what appears in the event log, and what is sent to the external logs,
such as SYSLOG and SNMP Trap Manager, through the Event Log Control page. On this
page, you can control parameters relating to the event log, such as what types of events
included in the log, and what method is used to collect the events.
To configure event logs
1.
Click Event Log and then Event Log Control in the menu.
The Event Log Control page displays.
Figure 7.3. Event Log Control Page
Event Count indicates the total number of events that
are in the internal file
Events per page The number of events shown on a page.
The user my change this value and hit the
Arrow-in-a-square to activate the change.
By default, there are 15 events per page.
Table 7.3. Viewing the Full Event Log page
Key Description