User manual

Managing System and Station Security
74 Wavion
Configuring RADIUS Assigned VLANS
Figure 6.15. Editing SSID with RADIUS -- Multiple VLANs
1. Perform steps 1-7 in Configuring VLANs on page 70 above.
2. Under Security Configuration, under Authentication, if you select WPA RADIUS or WPA
PSK + RADIUS you enable RADIUS authentication. In this case, there is an option to edit
multiple VLANs, one after the other. There can be up to 16 VLANs in the overall system.
3. Only one VLAN has the Default for SSID checkbox marked. This indicates to the WS410
which is the default VLAN when authentication on the SSID is performed and the RADIUS
does not provide the assignment to VLAN (due to possible configuration problems in the
RADIUS).
Make sure you configure the RADIUS server to handle clients on multiple VLANs.
Make sure that access to the RADIUS Server, including the Shared Secret, is configured
correctly. See Configuring RADIUS Server Parameters: Server Manager Tab on page 60