User manual

Managing System and Station Security
66 Wavion
Viewing and Configuring WPA Security - No VLANs mode
To view the SSID WPA Security - No VLAN mode pages
• Click on the SSID-VLAN Menu (See figure below).
• From the Authentication drop down menu, select either WPA PSK, WPA RADIUS or WPA
PSK + RADIUS.
• Select either TKIP, TKIP + WEP/40 or TKIP + WEP/104 from the Encryption choice.
• Enter up to 4 WEP keys. Their length is dependent upon the choice selected in the step
above; WEP/40 is 10 hex characters and WPE/104 is 26 characters.
• For the Security Keys, select either by Value or by Pass Phrase and enter the appropriate
value
Figure 6.8. Editing SSID/No VLANs Mode -- WPA Security Mode