User manual

Managing System and Station Security
64 Wavion
Viewing and Configuring WEP Security - No VLANs mode
To view the SSID WEP Security - No VLAN mode pages
• Click the WEP radio button in the Editing SSID page (See figure below).
• Select from the Authentication choices either Open or Shared Key. Shared Key is
recommended.
• Select either WEP/40 or WEP/104 from the Encryption choice.
• Enter up to 4 WEP keys. Their length is dependent upon the choice selected in the step
above; WEP/40 is 10 hex characters and WPE/104 is 26 characters.
Figure 6.7. Editing SSID/No VLANs Mode -- WEP Security mode
Options
Apply Click to have your changes take effect
temporarily
Save (from the menu) Click to have your changes remain in
effect after a reboot
Cancel Click to clear your changes; this is only
possible if Apply or Save were not clicked
Table 6.5. Editing SSID page
Field Description