User manual

Managing System and Station Security
62 Wavion
Viewing the SSID Pages
SSIDs are supported in two modes; Non-VLAN and VLAN. Non-VLAN mode is presented first
in this documentation. The reference section on security Introducing IEEE 802.11 and
WS410 Security Concepts on page 68 may be helpful in reviewing the SSID pages.
Following the presentation of Non-VLAN SSIDs is that of VLAN, see VLAN Introduction and
Configuration on page 70.
To view the SSID pages
• Click SSID, either from the Security page, or from the menu bar, as a sub-menu under the
Security item
The SSID page displays. This page allows management of the security configuration. It is
recommended to rename the SSID..
NOTE: The SSID pages are displayed differently depending upon their VLAN
mode (These concepts are explained in the following sections). In the
factory default, No-VLAN mode, the Broadcast SSID (BSSID) will be
displayed. In VLAN mode, multiple SSIDs are enabled. Clicking SSID
will display a table of SSIDs from which you may select the single
SSID of interest.
The following description will apply to the non-VLAN mode
NOTE: The SSID is case sensitive and shorter than 32 characters.